Casino Plus

List of the table of contents of this article:

• 1, How much does the car glass film cost?
• 2, Car trivia | What are the precautions for pasting car glass film
• 3, Did you really choose the right windshield sun film
• 4, How to remove old window film
• 5, Which brand of car window film is the best?
• 6、 Car front windshield film tutorial?

How much is the car glass film?

1. Generally speaking, the price of car window film is between several hundred yuan and thousands of yuan. The specific price depends on the selected material, brand, model and other factors. For example, some high-end brands of car window films may be more expensive, while some affordable brands may offer cheaper prices.

2. The price is less than 1,000 yuan; most of the films produced by traditional technology can be used universally. The thermal insulation effect is similar to that of ordinary thermal insulation glass. When the weather is particularly hot, there is no obvious impact. There is no problem in two or three years. And the price is cheap; about 2,000 yuan; the quality of the car film at this price is relatively high.

3. The price of 4 window glass films for ordinary models is generally only a few hundred yuan.The price of a good car with a good car film will be higher, more than 1,000 yuan.

4. The front glass film is 500~5,000 yuan. When buying a car film, you should pay attention to the construction environment, construction technology, quality assurance and after-sales service, etc.

5. The price of the glass film of the whole car is generally about 1,000 yuan for the front and rear gear plus the side gear, and the whole car film is about 400-2000 points. Therefore, for the selection of Weigu V70 front bumper car glass film, its price cannot be accurately given, which is more than 3,000 yuan.

Car knowledge| What are the precautions for pasting car glass film?

Precautions for pasting car film: 1. Avoid lifting the windows within three days after the car is filmed; do not wash the car within three days; when vehicles with sunroofs are driving within three days, especially at high speed, do not open the sunroof; do not open the window to wash the car within a week after the film is applied in winter. It takes about a month to work on the front and rear gears.

Precautions after car film Many car enthusiasts have put a film on their cars, which can cool down and protect themselves from the sun.And the role of protecting privacy, but many drivers don't know very well what issues need to be paid attention to after applying a film to their car. The following are some things to pay attention to after applying a film to the car.

If there is a high brake light on the rear windshield, it should be removed as much as possible when applying the film. If it is found that the silicone left by replacing the glass needs to be removed. The position of the membrane must be careful, and the membrane must not be damaged or polluted by dust. Do not cut the film on the car glass with a knife to avoid damaging the glass.

Xiao Qian looks at the world, high-energy answerer 2023-06-16 · If you don't understand anything, please feel free to ask me. Follow. Expand all within 1 day: (1) It's best not to wash the car within one day after applying the film, and it will basically not affect it after one day.

Did you really choose the right sun film for the car windshield

1. When buying a film, you should first consider its clarity and transparency. The clarity of high-quality film can be up to 90%, instead of the darker the color, the more heat-insulated. The special front bumpers of first-line brands are almost all light-colored, with high transparency and no fog.

2. The color selection of the car windshield sun film, it is recommended to choose lighter colors, such as green, sky blue, gray, brown, natural color, etc., the eyes will be very comfortable, and the light color of the high-quality sun film is very insulating. The surface of high-quality solar film has a scratch-resistant layer.

3. After buying a car, many car enthusiasts will put a film on the glass of the new car, or the front windshield, or the whole glass of the car. So what should I pay attention to about car glass film?Today, the editor will talk about this problem.

How to remove the old film of the car window

Hair dryer: Use the heat blown by the hair dryer to soften the glue behind the glass sticker, scrape it with a card while blowing, and finally wipe it clean with a cloth. Wind oil essence: Pour the wind oil essence on the film. After it seeps into the film, wipe it back and forth with a dry cloth. The glass film can be wiped off quickly.

The way to tear off the old film of car glass is as follows: tear it off directly by hand. For poor-quality car film, it is easy to tear it off directly, because its adhesive strength is not very good.

How to remove the old car film: x0dx0a I: It is easier to tear off the inferior film of x0dx0a directly. The adhesive strength of this film is not particularly good, and it is relatively easy to remove.High-quality car film is difficult to remove, and you need to find a master or buy more professional tools to deal with it.

The first step is to soften the film. You can pour hot water from the car window, then tear it open 1-2cm, and then use a steam gun and a scraper to slowly peel off the film. Don't use too much force to avoid scratching the window glass. If necessary, the residue can be scraped off with a rubber scraper. The second step is to remove the glue.

Which brand of car window film is the best?

Automotive glass film brands include: 3M, Kangdexin KDX, Weigu, Long film, Jingsheng film, etc. 3M 3M car film is a ceramic film, which is also a heat-absorbing film. The most famous model is the crystal series. However, one of the major disadvantages of the heat-absorbing film is that it will stop absorbing heat after reaching a certain degree of heat absorption, and the effect is limited.

Good quality automotive glass film brands: 3M, LLUMAR Dragon Film, 3V-KOOL, Quantum film, Johnson Johnson and Johnson film.

The top ten brands of glass film are listed as follows: Meiji: At present, the domestic sales volume is very good. The quality is very good, with explosion-proof, radiation-proof, scratch-proof, ultraviolet-proof and other properties. Classic colors, multiple choices. Compared with other brands of car film, it is the most cost-effective.

[/k0/]Magnetron sputtering coating. With a wide variety of products, it is in the leading position in the global market and technology in the field of metal deformation technology and coating. Gu Wei is a high-end automotive film brand founded in 1974, and it is also an international window film brand. Its manufacturer is the American Chemical Technology Company, which is a subsidiary of Isman Chemical.

American Dragon Film is a world-famous brand under Cott Glass Functional Film Company (CPFilms) in the United States, and is the world's most respected high-performance window film brand. The functions of dragon film include anti-ultraviolet, heat insulation, privacy and security anti-theft, etc., and it is the leader of architectural glass film.

Weigu Shanghai Haiyan Weigu International Trade Co., Ltd., a well-known brand of glass film. One of the most competitive brands in the world automotive thermal insulation film market, it is an intelligent glass film that can screen the spectrum in the world. Selected by Europe's top automobile manufacturers in the world, it is used for the film technology of its original car window glass.

Car front windshield film tutorial?

1. The front windshield of the carFilming tutorial: First, spread two large bath towels on the front cover and instrument, cover the chair, and wrap them tightly with plastic wrap.

2. First, spray water on the glass and scrape off the obvious dirt on the glass with a hard scraper, and then use a soft scraper to scrape off the water stains on the glass. Repeat this three or four times until the water is completely cleaned. Stick the film. Tear off the film, spray water evenly on the effective film surface, and put the torn plastic film aside for later use.

3. First, spread the sun film flat on the front windshield, and then blow it with a hair dryer to make it deform. While blowing, smooth the sun film by hand to stretch it, so that it can fit the curvature of the glass. Use a flattening tool to scrape the sunscreen so that the film fits perfectly into the front windshield. Cut the film into the required shape with a small knife.

4. Steps for car film: tailor the car film according to the size of the car window;Wipe and clean the front and rear window glass; use a roasting gun to shape the car film; finely cut the car film after the baking film is completed.

5. Car film application steps (applicable to windows and windshields): First, you need to measure the size of the glass and cut it according to the size. It doesn't matter if the size is bigger, but it must not be smaller, because it will shrink a little after the hot air blows. Then use a special car wash liquid to clean the car glass, especially the obvious stains.