bingo plus update today

Engine stuck cylinder - symptoms and bingo plus update todaytreatment methods of car engine stuck In daily driving, many car owners accidentally encounter the situation of engine stuck cylinder, so they cannot drive normally, which not only affects driving safety, but also leads to serious Mechanical failure. So, what is the engine adhesive cylinder? What are its symptoms and how to deal with it? Next, let's discuss it one by one. What is an engine adhesive cylinder? Engine sticky cylinder refers to the phenomenon that the cylinder of the car engine cannot move normally due to oil line, waterway, heat dissipation and other problems, resulting in the inability of the vehicle to run normally.Usually, the engine's sticky cylinder will appear after long-term high-load use, especially in high-speed driving or rapid acceleration. Symptoms The symptoms of the engine cylinder are very obvious, mainly manifested in the following aspects. 1. The oil temperature rises. When the engine cylinder is sticky while the car is running, there will be symptoms of rising oil temperature. This is because when the cylinder cannot operate normally, the power output by the engine needs to be dissipated by the heat dissipation of the engine oil. However, if it is under high load for a long time, the heat dissipation capacity of the oil cannot match the accumulation of heat, and the oil temperature will rise. Two. The motivation weakens. When the engine cylinder is stuck, the cylinder cannot move normally, so the output power will also be reduced. As a result, the vehicle can't keep up with the power when driving, and even can't drive normally. 3. Accelerated response is slow.If the engine cylinder is sticky, the acceleration response of the vehicle will become very dull. This is because the combustion in the cylinder cannot proceed smoothly, resulting in a delay in the output power of the engine, which affects the acceleration performance of the vehicle. Handling method 1. Change the oil in time. The quality of the oil has a great impact on the engine. If the oil is not changed for a long time, the solvents, additives, etc. in it will be fatigued and decomposed, and cannot withstand the high temperature pressure. Therefore, it is recommended that the car owner change the oil every time he drives a certain mileage or time to ensure the quality of the oil. Two. Pay attention to prevent the waterway from being blocked. During the driving process of the car, the problem of waterway congestion is relatively common. Once there is a serious blockage, the coolant cannot circulate normally, which will affect the heat dissipation and increase the engine temperature. 3. Pay attention to prevent high temperature. While driving, especially inIn the hot weather in summer, the temperature of the car is very easy to rise. Therefore, it is necessary to ensure the normal operation of the vehicle heat dissipation system and replenish the coolant in time to prevent the damage of the pump blades and the leakage of the heat sink, resulting in overheating. Four. Reduce the load appropriately and stop and check in time. If the car has symptoms of sticky cylinder while driving, do not force it. Slow down in time, reduce the load, and minimize the load of the engine. At the same time, stop and check in time, deal with problems as soon as possible, and avoid mechanical failures. In summary, the engine cylinder is a relatively common mechanical failure, but as long as the owner pays attention to maintenance in daily driving, the occurrence of such failures can be reduced. When there are symptoms of sticky cylinder, timely reduction of load, parking inspection, and troubleshooting can effectively avoid more serious mechanical failures, so as to ensure driving safety and long-term service life of the vehicle.

Contact Us
Phone：020-83484621