Casino Plus app

List of Catalogues of this article:

• 1,< A href='#Chang'an CX70 Fault Code Collection' title='Chang'an CX70 Fault Code Collection'>Chang'an CX70 Fault Code Collection
• 2、Volkswagen Maiteng Fault Code Collection
• 3,Casino Plus app Chevrolet Celio Fault Code Collection
• 4, Nissan Xuanyi Fault Code Collection
• 5, What is the 100+2 fault code of Cummins engine?
• 6, Diesel electric injection engine fault code collection

Chang'an CX70 fault code largeFull

Engine coolant temperature (sensor)/intake temperature (sensor) If the ECU detects that the engine coolant temperature (ECT) sensor follow-up gas temperature (IAT) sensor signal difference exceeds the set maximum value, the fault code will appear.

Car fault code Chang'an Automobile 60, 90, 7e, 00 (C3e00) refers to the sensor power supply problem. In the ABS anti-lock braking system, the function of the wheel speed sensor is to transmit the speed of the wheel to the control module in the form of an electrical signal to help the system understand when the tire will hold Die.

Car fault code Chang'an Automobile C106700 prompts that the initialization configuration has not been completed. Cause of failure: (1) The inside of the oil cup is too dirty, the filter is blocked or the oil surface of the oil cup is low. ( 2) There is a lot of air in the power steering system.(3) There is a foreign matter in the steering system, causing the steering pump flow control valve to be stuck.

esc failure indicates that the esc of the vehicle has failed. At this time, the electronic stability control system of the vehicle does not work. Sc alarm is a relatively complex fault problem. It is generally an alarm caused by the software system, and there are also false alarms. The detection is more troublesome. It is recommended to go to the nearby 4s store for maintenance.

The fault in this place is generally caused by the loose snap of the power cable groove of the starting motor. It is very dangerous to seriously cause the vehicle to turn off the engine and cut off the power of the whole vehicle during driving. It is recommended that you contact the repair shop for repair immediately.

The fault code refers to the low battery voltage of the engine control module. The engine control module is used to control the operation of the whole engine, and its main function is to control the optimal fuel injection and ignition timing of the engine;Another function is to monitor the components of exhaust emission control.

Volkswagen Maiteng Fault Code Collection

1. Cooling system In addition to insufficient coolant, There may also be a failure of the cooling fan. 4 The fault light of the brake anti-lock system (ABS) lights up, indicating that the brake anti-lock failure at this time.In addition, if the electronic differential lock EDS fails, it will also cause the fault light to light up.

2. Volkswagen Maiteng fault code p0101 refers to the failure of the air flow sensor. The reasons for the p0101 fault code are: dirty air filter, air intake system leakage, incorrect installation of oil refueling port cover or oil scale, air flow sensor failure, etc.

3. Cooling system In addition to insufficient coolant, the cooling fan may also fail. 4 The fault light of the anti-lock braking system is on, indicating that the anti-lock braking is invalid at this time. In addition, if the electronic differential system EDS fails, it will also cause the fault light to light up. At this time, if the vehicle steps on the brake pedal urgently, it may cause side slip and tail swing.

Chevrolet Celio Fault Code Collection

1. Overheating 11 Brake wear 12 Vehicle overload 13 Compressor overheating, please wait a moment.

2. This fault code appeared in Saio. Check whether there is any abnormal noise, and learn to distinguish the abnormal noise that belongs to the reasonable noise. It is difficult for ordinary car owners to distinguish which are faulty abnormal noises and which are reasonable abnormal noises. When I went to the repair shop to test the abnormal sound of the vehicles, only nearly 20% of the vehicles really had problems.

3. Fault code: P0302 Chinese meaning: 2nd cylinder fire detected English meaning: Cylinder 2 Misfire Detected Category: ignition system Detailed meaning: cylinder fire refers to various reasons during engine operation The phenomenon that the mixed gas cannot burn normally in the cylinder.

Nissan Xuanyi fault code collection

Xuanyi fault code P0846 is a fault of the oil pressure sensor of the transmission, and the valve body in the transmission needs to be replaced. The function of the transmission hydraulic pressure sensor is to transmit the transmission hydraulic pressure to the transmission control module in the form of an electrical signal as a reference for the work of the transmission hydraulic pressure control solenoid valve.

The fault code P1615 of the new Xuanyi 13 model indicates the communication failure between the new Xuanyi 13 engine control module (ECM) and the vehicle anti-theft system. The 13-year-old model of the new Xuanyi is caused by the failure of electronic components, circuit connection problems or sensor failures in the ECM or anti-theft system. It is recommended that you go to a professional car repair shop for inspection and maintenance.

P0448. Xuanyi Automobile will turn on the fault light when it is cold in winter, and the P0448 vent control valve fault code will be displayed. In this case, you should go to the 4s store for inspection and maintenance in time. Xuanyi Classic Edition is the 2012 6EX automatic comfort version, which is a front-wheel drive car produced by Dongfeng Nissan Automobile.

What is the 100+2 fault code of Cummins engine?

1. The fault code indicates that there are multiple cylinders on fire or the electronic control unit (ECU) cannot determine which cylinder is on fire.

2. The specific analysis is as follows; sensor problems; the sensors mentioned here include water temperature, crankshaft position, air flow, air intakeTemperature, oxygen sensors, etc. When these sensors are damaged, the contact is poor or the signal is interrupted, the ECU of the car cannot accurately obtain the data of the engine, which will cause the engine fault light to turn on.

3. ABS indicator light The ABS light is always on indicates that the anti-lock braking system has failed. Under normal circumstances, the light will light up when the ignition switch is turned on, and the system will enter the automatic detection program. After completing the detection, the light will go out. If the light is always on while driving, it means that there is a fault in the ABS system.

4. Oxygen sensor failure. At present, two oxygen sensors are generally installed on cars, one each before and after the ternary catalyst. Its function is to detect the air-fuel ratio of the engine under different working conditions. At the same time, the front one provides a signal for the ECU driving computer to adjust the fuel injection volume. The work of the narator is good or bad.

5. Possible causes of failure: A. The failure of the start-up system makes the engine unable to rotate or rotate too slowly: 1 the battery storage is insufficient, the electrode pile clamp is loose or the electrode pile column is seriously oxidized; 2 the total circuit fuse is broken; 3 the ignition switch fails; 4 the starter fails; 5 the starter line is broken or the line connector is in poor contact.

Diesel electric injection engine fault code collection

Fault phenomenon: the engine speed is unstable, the power is obviously insufficient, and there is a tempering phenomenon, it can be considered that the engine has a fault of the mixed gas is too thin.

DTC P2135: The throttle position sensor 1-2 is unreasonable. The engine control module detects that the voltage difference between the throttle position sensor 1 and the throttle position sensor 2 exceeds the predetermined value and lasts for more than 1 second.

The specific analysis is as follows; sensor problem; the sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, poor contact or the signal is interrupted, the ECU of the car cannot accurately obtain the engine data, and at this time it will Cause the engine fault light to turn on.

Most engines are equipped with disposable non-washable paper filter gasoline filters, and the replacement cycle is generally 10,000 kilometers. If there are few impurities in the gasoline, it is not a big problem to replace one for 15,000-20,000 kilometers. The filter has an arrow mark for the inlet and out of the oil port. Do not install it in reverse when replacing it.