TNT Sports

List of the table of contents of this article:

• 1. Where is the Jianghuai Ruifeng s3 engine number
• 2, What is the brand of Jianghuai Ruifeng s3 engine
• 3、JAC Ruifeng s3 what engine
• 4、TNT Sports Who owns the three major parts of Ruifeng s3

Where is the Jianghuai Ruifeng s3 engine number

The engine number of JAC Ruifeng s3 is located in the engine cylinder block. The engine number can also be found on the driver's license. The engine number is a mark to avoid arbitrary modification of the engine, which must be inspected by the annual vehicle inspection office. The following is a brief introduction to the engine number: 1.

The engine number is located on the polished surface of the second side or rear, and the frame number (vehicle identification code) is located in the first half of the frame.

The cast iron cylinder block under the right exhaust branch pipe is close to the fan wheel, that is, there is a rectangular plane on the cylinder block with the engine steel stamp number. The engine number is the same as the VIN number of the car, and the engine number is unique.The order of different manufacturers' engine numbers and their contents are different.

The frame number of the Rui windmill is under the back of the co-driver's seat. There is a small black cover that can be seen when removed. The frame number and engine number can also be found in the lower left corner of the front windshield of the car and in the engine compartment.

In the engine compartment. Ruifeng S3 is a small SUV with a 360-degree panoramic camera system and a parking assistance system. The device number is in the engine compartment. When the front hatch is opened, it can be seen by the sandboard in front of the driver's seat.

What is the brand of Jianghuai Ruifeng s3 engine

Jianghuai Ruifeng s3 uses two engines, one is a 5-liter naturally aspirated engine and the other is a 6-liter naturally aspirated engine.Jianghuai Ruifeng s3 is a small SUV under Jianghuai. The wheelbase of this car is 2560mm, and the length, width and height are 4345mm, 1765mm and 1640mm respectively.

JAC Ruifeng s3 uses an engine independently developed by JAC, codenamed hfc4gb3d engine. This 5L naturally aspirated engine has a maximum power of 113 horsepower/6000rpm; the maximum torque is 146 Nm/3500-4500rpm.

JAC Ruifeng S3 engine 5L As for what engine Jianghuai Ruifeng S3 Ruifeng S3 is equipped with a 5L naturally aspirated engine, with a maximum power of 113 horsepower/6000 rpm. The maximum torque is 146 Nm/3500-4500 rpm.

The mass-produced Jianghuai Ruifeng s3 is an HFC4GB5L engine, and the Ruifeng S3 adopts a 6L VVT engine with a torque of up to 155Nm. In terms of power, the mass-produced Ruifeng S3 is equipped with a 4GB5L engine, with a rated power of 83kW/6000rpm; the maximum torque reaches 146Nm, and the low-end torque reaches 100Nm.

What engine is Jianghuai Ruifeng s3

1, JAC Ruifeng s3 is a small SUV under JAC. The model adopts two engines, one is a 5-liter naturally aspirated engine and the other is a 6-liter naturally aspirated engine. The wheelbase of the vehicle is 2560mm, and the length, width and height are 4345mm, 1765mm and 1640mm respectively.

2. Jianghuai Ruifeng s3 uses a total of two engines, one is a 5-liter naturally aspirated engine, and the other is a 6-liter naturally aspirated engine. Jianghuai Ruifeng s3 is a small SUV under Jianghuai. The wheelbase of this car is 2560mm, and the length, width and height are 4345mm, 1765mm and 1640mm respectively.

3. Jianghuai Ruifeng s3 adopts two engines, one is a 5-liter naturally aspirated engine and the other is a 6-liter naturally aspirated engine. JAC Ruifeng s3 is a small SUV under JAC, with a wheelbase of 2560mm and a length, width and height of 4345mm, 1765mm and 1640mm respectively.

4. The mass-produced Jianghuai Ruifeng s3 is an HFC4GB5L engine, and the Ruifeng S3 adopts a 6L VVT engine with a torque of up to 155Nm. In terms of power, the mass-produced Ruifeng S3 is equipped with a 4GB5L engine, with a rated power of 83kW/6000rpm; the maximum torque reaches 146Nm, and the low-end torque reaches 100Nm.

5. Ruifeng S3 is a small SUV under JAC, which adopts two engines: 5-liter naturally aspirated engine and 6-liter naturally aspirated engine.Its body length, width and height are 4345mm×1765mm×1640mm respectively, and the wheelbase is 2560mm.

Who owns the three major parts of Ruifeng s3

The three major pieces of Ruifeng s are all Jianghuai's. S3 is a small SUV under Jianghuai. This car has two engines, one is a 5-liter naturally aspirated engine and the other is a 6-liter naturally aspirated engine. The length, width and height of s are 4345mm, 1765mm and 1640mm respectively, and the wheelbase is 2560mm.

Three pieces of Ruifeng s3 belong to Jianghuai. Rui s3 is a small SUV under JAC. This car adopts two engines, one is a 5-liter naturally aspirated engine and the other is a 6-liter naturally aspirated engine.The length, width and height of Ruijie s3 are 4345mm, 1765mm and 1640mm respectively, and the wheelbase is 2560mm.

The three major parts of Ruifeng S3 are basically from Jianghuai. Ruifeng S3 is a small SUV under JAC, which adopts two engines: a 5-liter naturally aspirated engine and a 6-liter naturally aspirated engine. Its body length, width and height are 4345mm×1765mm×1640mm respectively, and the wheelbase is 2560mm.

Power system: JAC Ruifeng S3 is equipped with an efficient and reliable engine with strong power output and good fuel economy. According to the feedback of car owners and the evaluation of the automobile media, the Ruifeng S3 performs well in daily use, with rapid acceleration response and smooth driving.