DigiPlus Philippine

List of the table of contents of this article:

• 1,DigiPlus Philippine WinPE can't open the solution to the computer C disk
• 2, pe can't open the c disk
• 3, Computer problem, you can see the c disk symbol, but the c disk capacity is not displayed, and the rest of the disks...

WinPE can't open the solution of the computer C disk

The reason why the second C disk can't be opened may be the problem of the disk bad channel. Right-click to select the computer disk, click Properties, then select Tools, and click Start Check. It is best to solve the problem by checking the tool.

Start with the PE system, and then start the "Partition Assistant Professional" software. It is available in the general PE system.

I: Let's talk about hardware first: Generally speaking, computer hardware is not easy to break. In addition, enter "msconfig" in "Run" (Win+R) to prohibit viruses in startup. The solution to the problem that the hard disk partition cannot be opened by double-clicking. If there are hidden files such as autorun.inf under each partition, it is better to restart the computer after deleting it.

The solution is as follows: run the anti-virus software and perform a large scan of the whole disk; if the computer disk cannot be opened due to the exclusion of computer viruses, it may be caused by the loss of registration information of computer-related components.

Start with the PE system, and then start the "Partition Assistant Professional Edition" software, which comes with the PE system.Right-click the C disk and select Advanced Operation - Check Errors in turn. In the pop-up dialog box, select "Use CHKDSK to check partition errors", and then "OK".

pe can't open c disk

1, this is actually very simple.. It is caused by a disk error. Use the PE system to run CHKDSK C: /r 90% can be repaired.. But after the repair, the system may not be able to enter.. It is possible that some system files will be damaged, but at least they can be accessed. Copy the data of the C disk in PE.

2. The C disk displayed under PE is PE's own system, not the C disk on the computer. To find out which is the C disk of the computer, you have to open and identify it one by one.

3. Set the boot order in the computer BIOS and adjust the USB flash drive startup to the first one, so that you can enter the PE system. When entering the USB flash drive system, you can choose to enter winpe. I chose the first one.

4. The system is not installed correctly. When reinstalling the system, some problems may occur, such as the system is not installed correctly. If this happens, you can't find the C disk. At this time, you need to check whether the installer of the system is correct and there are no errors. Just reinstall the system.

5. Be able to enter the system and use. Old hairy peach. One-click restore. You need to go to the official website of Lao Maotao to download it. One-click restore. 2 Can't enter the system. Use a CD-ROM or USB flash drive to start the disk. 3 Remove the hard disk, install the system on the computer, and then install it back. BIOS must be set first for CD-ROM and USB flash drive installation.

Computer problem, you can see the c disk symbol, but the c disk capacity is not displayed, and it cannot be opened. The rest of the disks...

The most common reason why the first type of C, D, E, F disk cannot be opened is that your computer is poisoned, and it is relatively serious. Your anti-virus software has not detected it. At this time, you can Turn on the anti-virus software and scan the computer's full antivirus, and you can find the virus.

This situation occurs because the disk symbol assigned by the hard disk partition is mistakenly deleted. It can be fixed by the following steps: click the start menu in the lower left corner and select "Run". Enter "diskmgmt.msc" in the "Run" editing box, and then click OK.

Check the hardware connection. First, make sure that all hardware connections are correct and not loose. Check whether the data cable and the power cable are firmly connected. If there is a problem with an external hard disk or USB flash drive, you can try to connect it to a different USB port.

Is this an Apple computer? If so, it's normal. The 80.31G is Apple's partition. By default, this partition cannot be recognized by Windows. Of course, it can't be displayed. As for the other two smaller ones, the system partitions can't be displayed either.

My computer only shows the solution of disk C: First of all, emphasize a few points: the system disk cannot be adjusted. All the data on the adjusted disk will be lost (which can be moved to a disk that is not divided). Operation steps: Close all applications, open Control Panel, open Management Tools, and open Computer Management.

Has your hard disk been formatted? If not, format it and it's OK. If not, see if you need to right-click to open it. If so, it means that you have been poisoned, and it's OK to kill it.