DigiPlus Philippine

List of Contents of This Article:

• 1、Yuchai Guosi 6a engine burning engine oil
• 2、DigiPlus Philippine Why is the Guosi Yuchai engine weak when climbing hills?
• 3, Yuchai 4E160 engine parameters

Yuchai Guosi 6a The main problem of burning engine oil

burning engine oil is that there is a gap between the oil ring and the cylinder after long use. The function of the oil ring is to isolate the gas inside and outside the cylinder, and to remove the oil that flies shallow to the inner wall of the cylinder. There is a gap between the oil ring and the cylinder, and there is a lot of oil left on the inner wall, so the oil is burned.

Abnormal. If this is the case, the production car also needs a fuel tank. Make sure there is no oil leakage.

Due to domestic fuel quality and international standardsAsynchronously, it is very easy to form a large amount of carbon accumulation in the combustion chamber during the engine operation. Carbon accumulation is an important reason for various problems such as engine problems such as engine oil.

Why is the Guosi Yuchai engine weak when climbing hills?

1. The engine foot mat is aging.The foot pad supports the engine. After aging, it cannot work normally. Just replace it. There are many plastic parts in the engine compartment, such as the engine cover, intake pipe, etc., which collide with the engine compartment when loose, causing abnormal noise. Just tighten the scattered plastic parts.

2. The engine of Guosi Yuchai is weak uphill and has no explosive power. Personally, I think it may be caused by the dirty fuel injector of the car engine. It is recommended to check whether the fuel injector of the car needs to be cleaned.

3. The working process of diesel engines has many similarities with that of gasoline engines. Each working cycle also goes through four strokes: intake, compression, work and exhaust.

4. The reason is that the combustible mixture is too thick. There is too much oil in the engine fuel. The piston ring or crankshaft oil seal is poorly sealed. There is moisture in the fuel.

5. Insufficient vacuum Other reasons: the engine temperature is too high. The deformation of the transmission parts causes a torsion force.

6. There are many reasons for the powerlessness of cars uphill, including engine failure, oil system failure, air intake system failure, ignition system failure and tire problems. The following is a specific analysis: engine failure: engine failure includes excessive engine temperature, engine cylinder deficiency and serious carbon accumulation, etc.

Yuchai 4E160 engine parameters

1. Yuchai 4E160 engine: four-cylinder engines with a displacement of about 5L, a power of about 160 horsepower, and a cylinder diameter of 100-110mm are generally suitable for From light trucks to medium-sized models. Pass throughThis model has a wide range of uses and strong adaptability, so it has a wide market and rich product brands. At the same time, it has achieved the prosperity of the engine in this displacement segment.

2. The parameters of Yuchai yc4e160156 electric engine are installed in different brands of cars as follows: according to the official website of Yuchai engine, the engine model is: YC4E160-42. Air intake form: supercharged and cold. Number of cylinders: 4. Cylinder arrangement form: in series. Discharge: 26L. Maximum output power: 118kW.

3. Liter. Yuchai YC4E16056 engine, the golden power of the four-cylinder engine world, 26L displacement, rated speed 2600r per min, maximum torque up to 650N per m, the engine requires 8 liters of diesel engine oil. In addition to lubrication, engine oil also has cleaning, cooling, anti-rust, sealing, anti-oxidation, buffering and other functions.

4, mm, Yuchai 4E is a 4110 engine, and the piston stroke is 112mm. Dry cylinder liner.

5. Hello, the standard speed of Yuchai 4E engine is 2600 rpm.