DigiPlus Philippine

The DigiPlus Philippineengine is the core component that the operation of the car depends on. If there is a problem, it will not only affect the performance of the car, but also may cause other parts to be affected. Therefore, it is very important to diagnose and solve engine problems in time. This article will introduce some common engine problems, as well as their causes and solutions. 1. Difficulty in starting the engine. If the difficulty in starting the car, it may be caused by the following reasons: (1) Insufficient battery power: When the battery power is low, the starting power of the engine will be weakened, which can be solved by replacing the battery or charging. ( 2) Engine failure: such as poor condition of the ignition system, problems with the fuel system, carbon accumulation inside the cylinder, etc., which need to be repaired and maintained. ( 3) Cold weather: in the coldIn the weather, it is not uncommon for the engine to be difficult to start. You can try to use a preheater or warm the car for a while before starting. Two. Abnormal engine noise The abnormal sound of the engine may be caused by the following reasons: (1) Friction noise: It may be due to the wear of accessories, which need to be replaced or re-lubricated. ( 2) Insufficient lubricating oil: If the engine lacks lubricating oil for a long time, it will lead to friction and wear, resulting in abnormal noise. ( 3) Water pump failure: If the water pump fails, it will cause the cooling system to be abnormal, resulting in abnormal sound. Solution: After finding the abnormal sound, a professional technician should check it in time to find out the cause of the abnormal sound, and then take appropriate maintenance measures. 3. Engine power reduction If the overall performance of the engine decreases, it may be caused by the following reasons.Of: (1) Failure of the fuel system: such as damage to the fuel injector, blockage of the fuel filter, etc., which need to be checked and cleaned. ( 2) Air filter blockage: When the air filter is blocked, it will make it difficult for the engine to breathe in, thus reducing the overall performance. ( 3) Failure of the ignition system: If there is a problem with the ignition system, it will lead to insufficient combustion and reduce the power. Solution: Check and repair faulty parts in time, such as replacing fuel injectors, cleaning air filters, etc. Four. The engine overheats. If the temperature is too high when the engine is running, it may be caused by the following reasons: (1) Failure of the cooling system: such as water pump failure, water leakage in the water tank, etc., which need to be checked and maintained. ( 2) Insufficient engine oil: When the engine oil is insufficient, the lubrication effect will deteriorate, thus reducing the heat dissipation effect.(3) Incomplete combustion of fuel: If the combustion of fuel is incomplete, too much heat will be generated and the quality of the environment will also be affected. Solution: Inspect and maintain the cooling system, and ensure sufficient engine oil, while reducing the phenomenon of incomplete fuel combustion as much as possible. In a word, it is very important to find and solve engine problems in time, which can not only extend the life of the car, but also ensure the safety and stability of the vehicle. Therefore, car users should always pay attention to the condition of the engine, and if there is any problem, they should contact professional technicians for inspection and maintenance in time.

Contact Us
Phone：020-83484621