bingo plus update today

List of catalogs of this article:

• 1, Which model of engine is good for Chevrolet
• 2、Auto 0.8 How about the engine
• 3,bingo plus update today Chevrole Lechi 0.8 engine distributor photoelectric principle
• 4. How about the Chery 08 displacement engineSample
• 5, What's wrong with the Chevrolet Lechi 0.8 engine burning oil for 80,000 kilometers

Which model of engine is good

1. OK. Chevrolet adopts two engines, GM LYX and LTG, with profound technical accumulation, advanced production technology and reasonable quality control process, which makes it have excellent performance and quality.

2. Chevrolet Jingcheng 8 has a good engine. Advanced technology: Adopting a dual-channel design to make the flow rate of the engine smaller, thus improving the torque of the engine. Compared with the belt transmission used in other models, it adopts timing chain transmission, which has the advantages of low noise, low failure rate and strong transmission durability.

3. High quality. The engine model of Chevrolet Explorer 5T is LYX, which is equipped with a 6-speed manual automatic transmission, and the 0T engine model of the 550T is LTG, which is equipped with a 9-speed manual automatic transmission.

4. Cruze's 8LEcotec engine has DVVT--double continuous variable valve timing system and rotary sleeve two-stage variable intake manifold technology, with a maximum power of 105kW\/6200rpm, maximum torque 177N·m\/3800rpm.

5. The ltg engine used by the old explorer is the top ten engines, and the new model does not use the top ten engines. In 2021, the Explorer used two engines, one was a 5-liter turbocharged engine and the other was a 0-liter turbocharged engine.

How about the Otto 0.8 engine

The feature of this car is that the maintenance cost is low. Happy Prince adds a heat dissipation port on the engine hood on the basis of the Otto car, adding a tachometer, double airbag, and central control. Lock, four-door electric window and other configurations; the displacement is 0.8, and the fuel consumption control is very good.

Power performance: The 1992 Otto model is equipped with a 0.8L three-cylinder engine, with a maximum power of 35kW and a maximum torque of 67N·m. Although the power is not too strong, it is enough to meet the needs of urban walking, and the acceleration performance is relatively smooth.

Durable and reliable Although the Otto engine has been reduced in volume and displacement, its precision has not been reduced. Suzuki has always been very cautious in engine design, and Otto Engine focuses on all-round high-quality design and production, striving to make every part of the engine meet high standards.

Chevrolet Lechi 0.8 engine distributor photoelectric principle

The faster the rotation speed, the more centrifugal force Larger, the higher the vacuum of the engine intake manifold, the more it can play a regulating role. Turn on the ignition switch and start the engine. If the ammeter swings between 3~5a, but the engine shows no signs of fire, it indicates that the central high-voltage line of the high-voltage coil or electric ignition coil is faulty, or the capacitor has a leakage failure.

The working principle of the distributor: In the automobile ignition system, high-voltage electricity is generated by the ignition coil, and a thick wire is transmitted to a machine, which is the distributor.

[Working principle of the distributor] Turn on or disconnect the primary circuit to distribute the high-voltage electricity generated by the ignition coil to each cylinder spark plug according to the engine, and automatically adjust the ignition time according to the engine speed and load.

The voltage is transmitted from the ignition coil to the distributor cover through the spark plug wire, and then the voltage is transmitted from the central terminal of the cap to the rotor located in the distributor. When the distributor rotates, the rotor also rotates, distributing the voltage to the external terminals of each cap one by one at a time.

How about the Chery 08 displacement engine

1. There is no difference in comfort, space and quality. The difference is mainly in the engine.

2. The maximum power of the SQRE3G08 engine is 43 kilowatts, and the maximum torque of the engine is 6,000 Nm.The SQRE3G08 engine is the engine of Chery Automobile. It is a naturally aspirated engine with a maximum power of 43kW and a torque of 6000rpm.

3. For general household use, 3 quality is sufficient. The 08 displacement is a three-cylinder SQR372 engine. The technology is mature and reliable. The 1-liter is a four-cylinder SQR472FB engine, which has good stability and small idling vibration. Relatively speaking, the three-cylinder engine is slightly more fuel-efficient. This car as a whole It is relatively fuel-efficient, and the fuel consumption is generally 5 liters to 6 liters.

4. The quality of the Chery Tiggo 8 engine is reliable. The engine carried by Chery Tiggo 8 adopts advanced technology and high-quality parts. After rigorous testing and verification, it has excellent performance and reliable quality.

5. Power OneThe Chery Ruihu 8 is equipped with a 5T engine, in which the output power of the 5T turbocharged engine is 112KW, the maximum torque is 205Nm, and the high horsepower can reach 152 horsepower.

What's wrong with the Chevrolet Lechi 0.8 engine burning oil for 80,000 kilometers

Hello, there is no slight problem. I have to replace the piston ring to clean the engine.

The viscosity of the oil is too small: If the viscosity of the oil is too low, the phenomenon of burning the oil will also occur. The viscosity of the oil is too small, and it has good fluidity. It is easy to rush into the cylinder and then participate in combustion. Too much oil: If the oil pressure is too high, part of the oil will be pressed into the cylinder, resulting in the phenomenon of burning oil.

There is a problem with the accessories, exhaust valve, valve oil seal, cylinder pull cylinder, and insufficient cylinder pressure. It is a long-term lack of cleaning of the oil line, the replacement of antifreeze is not timely, the oil use cycle is too long, and the piston ring is stuck. The more common situation is that the piston ring is stuck.

The reason why the engine burns oil; the owner should replace the valve oil seal of the vehicle in time to ensure the seal of the valve.

The reason for the leakage of oil at the valve oil seal is that the quality of the valve oil seal is poor, or the engine temperature is high, or the exhaust gas is blocked and the exhaust gas has a great impact on the valve oil seal. The crankshaft ventilation mechanism cannot filter the oil, which leads to the oil being sucked into the intake duct. In this case, the only way to improve the oil filter mechanism can be improved to eliminate failures or improve efficiency.