DigiPlus stock

List of contents of this article:

• 1. specific steps to reinstall the system
• 2, computer xp system installation tutorial (how to reinstall the system) extreme Great
• 3、How to reinstall the computer system xp
• 4,DigiPlus stock How to make your own xp system | How to make your own xp system method at home
• 5, CD-ROM reinstall system xp step diagram

specific steps to reinstall the system

1. Insert the system disk (system CD-ROM and system USB flash drive) into the computer. Set the BIOS to restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS. After the boot system is restarted, the system starts from the system disk, and the installation is normal after booting.

2. You can follow the steps below to install the system, put the system into the CD, buy a win7 CD, and put the system CD into the optical drive.Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.

3. If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.

computer xp system installation tutorial (how to reinstall the system) great

1, start the computer and press the DEL key (some computers It's the F2 key), enter the CMOS settings, enter the BIOS FEATURES SETUP, then enter the Boot Sequence, press the up and down keys to select CD-ROM, C, A, and then press the ESC key, F10 key, Y, Enter, manually shut down or put in the installation CD Press the reset key.

2. Prepare a computer to ensure that the configuration of the computer meets the requirements of the XP system. Prepare the XP system installation CD or USB flash drive.Back up important data in the computer to avoid loss during installation. Installation steps Insert the XP system installation CD or USB flash drive into the computer and restart the computer.

3. How to install the XP system. The first step is to set up the light start: the so-called light start means that the computer first reads the optical drive when starting up. In this way, if there is a CD with an optical start function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD-ROM).

4. Install and set up step by step according to the prompts. After copying the file to the hard disk in Windows XP, the CD must be removed from the optical drive before restarting the computer for the first time, otherwise the system will still start from the CD and execute the installer in a loop. Method 2: Then, press any key to enter the optical drive startup mode and load the Mini version of the operating system.

5. Personally, I think it's okay to try to install it, but if you want a tutorial, I'll give it to you. In fact, it's very simple~~ Method 1: First, make sure that your optical drive is the first startup sequence and supports booting from the optical drive. To install from the CD-ROM, you need to set the BIOS so that the system can start from the CD-ROM.

6. If you want to reinstall the system, I can introduce how to install it: For how to install, you can read the following article. There are teaching you how to install single systems, dual systems, etc., and there are color pictures. I believe you will learn to dress up. My computer is also installed here Method 1: First, make sure that your optical drive is the first boot order and supports booting from the optical drive.

How to reinstall the system xp

1. Buy an XP one-click recovery disk and partition it during installation.Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.

2. The specific steps are as follows. First of all, we need an installation tool to help us complete the system reinstallation. Download Fat Claw Installation Assistant:, and then click "Software Download" to complete the installation of the program. You need to pay attention to turning off the third-party anti-virus software on the computer, otherwise it will cause false alarms.

3. Restart the computer, put the CD, and press Enter when reading the CD (that is, when there is a row of English press anykey to boot from CDROM on the black screen, press Enter immediately).(2) After a moment, the welcome installer interface appears on the screen. Select Install Now and return.

4. The simplest way to re-XP system is the backup and restore method.

How to make your own xp system | How to make your own xp system at home

1. Use the USB disk boot disk making tool, download the WinXP boot disk making tool (you can find it on Baidu TO), AND THEN RUN. AFTER THE DOWNLOAD IS COMPLETED, IT WILL BE LIKE THIS: DOUBLE-CLICK USB:/WINDOWS:/XP TO INSTALL THE USB DISK SYSTEM.

2. Method 1: First, make sure that your optical drive is the first startup sequence and supports booting from the optical drive. To install from the CD-ROM, you need to set the BIOS so that the system can start from the CD-ROM.

3. Next, I will briefly talk about the way to make a universal mirror image: get ready to install Windows XP and use Windows Update to upgrade the latest system patches (including service Pack l and other latest H Ot fix).

CD-ROM reinstall system xp step-by-step diagram

First of all, buy your favorite system CD-ROM, and then start setting. Divide into the following steps: start the computer and hold down the DEL key until the BIOS setting window appears. Select and enter the second item, find Advaced BIOS Features, press the return key, press the down key of the arrow key, and move the cursor to Hard Disk.

Go to the computer store to buy software and buy an installation CD of winxp sp3. Or search and download the winxp spiso disc image file on the Internet and burn it to the disc.

The grid machine you mentioned is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).

The CD-ROM starts and enters the installation interface of Windows XP.