Bingo Plus stock

List of contents of this article:

• 1,< A href='# How about the Skoda Xinrui engine? Xinrui usesWhat engine' title='How about the Skoda Xinrui engine, what engine does Xinrui use'>How about the Skoda Xinrui engine, what engine does Xinrui use
• 2, What engine gearbox does Skoda Xinrui use
• 3、Skoda Xinrui 18 engine small throttle has a snoring sound
• 4,Bingo Plus stock What is the reason for the engine shaking when the Skoda Xinrui is hot?

How about the Skoda Xinrui engine? What engine does Xinrui use

Kodak Xinrui is a domestic engine. The engine model is EA211. EA-211 engine Volkswagen's new car engine. This series of engines is also the first engine to adopt a cylinder shutdown system on a four-cylinder engine, and has obvious advantages in improving fuel economy.

Engine noise: Although the Skoda Xinrui provides powerful power, the engine noise of the car is loud, especially when driving at high speed, passengers may feel uncomfortable and noisy.

Skoda Xinrui is a domestic engine. The engine model is EA211. EA-211 engine Volkswagen's new car engine. The engine of this series is alsoThe first engine adopts a cylinder closure system on a four-cylinder engine, and has obvious advantages in improving fuel economy.

Power: At present, Skoda Xinrui provides two engines for consumers to choose from, one is a 2T TSI engine with a maximum power of 85kW; the other is a 5T TSI EVO engine with a maximum power of 110kW.

Yes. The engine of Skoda Xinrui adopts multi-point direct injection, which has high fuel efficiency and saves fuel consumption. The maximum output power of this engine is 82kW (112hp) and the peak torque is 145nm, which is enough for home use.

What engine gearbox does Skoda Xinrui use

1. The engine of this car is an ea211 engine, and the gearbox adopts Aisin's MQ250 gearbox. The three major parts of Santana and Jetta are all the same product, but the tuning of the product is different.

2. Front-wheel drive. According to the inquiry of Pacific Automobile Network, the Skoda Xinrui is equipped with a 5L engine and a 5-speed manual transmission, with a maximum power of 82 kilowatts and a maximum torque of 145 Nm. The driving mode is front-wheel drive. The front suspension uses McPherson-type independent suspension, and the rear suspension uses torsion beam non-independent suspension.

3. At present, Xinrui is equipped with the third-generation Aisin 6AT gearbox. Compared with the previous generation, the new energy-saving valve has higher efficiency, which can avoid increased fuel consumption when the vehicle is at low speed. AccuseThe computer program of the oil pump has been optimized, which can improve the fuel efficiency by 9% and achieve more accurate regulation of the amount of oil.

4. Skoda is a Volkswagen brand, and Skoda's car engine and gearbox are Volkswagen products. If you are interested in Skoda cars, you can go to the local Skoda 4s store for a test drive. The fuel economy of Skoda cars is also very good.

Skoda Xinrui 18 engine small throttle has a snoring sound

As for others, it may be an internal engine problem , such as EGR valve blockage, etc. 3. The engine has a hissing sound, just like steam or air coming out of the engine. Generally, after hearing this sound, the engine will quickly lose power. There may be a problem. The engine is overheated. Check the cooling system.

The abnormal noise of the engine may be caused by the use of poor-quality engine oil, long-term non-change of oil, lack of oil and other reasons. It is easy to increase the friction between the valve and the condit and the hydraulic rod, thus causing abnormal engine noise.The first intuitive feeling of Skoda's new edge is that it is young and elegant.

This is because when the car is cold, the gap between the cylinder wall and the piston has not reached the optimal size, and the lubrication of the oil is not sufficient. Usually, when the temperature of the engine cylinder reaches about 95 degrees, the sound will return to normal. The cause of engine oil.

The reasons for the sound are: the gap between the piston and the cylinder wall is too large; the piston pin assembly is too tight or the connecting rod bearing assembly is too tight; the gap between the straight rod and its guide hole is too large; the contour of the gas distribution cam is worn; sometimes, the starting grip is loose and the pulley makes the pulley sound (obvious when the rotation speed changes).

What is the reason for the engine shaking when the Skoda Xinrui is hot?

1. Send when the car is hotThe vibration of the motive is caused by abnormalities in the fuel system and ignition system, and the failure of the intake system and engine mechanical system. Fuel system: the fuel injector fails, the fuel injection volume is uneven, and the atomization form of the fuel injector is poor, resulting in an imbalance in the power of each cylinder.

2. The main reason for idling jitter: serious engine carbon accumulation: cars always have the problem of carbon accumulation, including cylinder carbonization, throttle valve carbonization, spark plug carbonization, intake carbonization, etc.

3. The reasons for the unstable idle speed of the engine are: excessive carbonization rate of the engine, empty air filter, low ignition energy, abnormal water temperature, carbon accumulation of the valve and air intake, blockage of the fuel injector, etc.

4. It seems that this situation is mainly caused by the failure of the engine water temperature sensor. It is recommended that you go to the repair shop to read the water temperature signal of the engine. If it is abnormal, you can directly replace the water temperature sensor.

5. What is the reason for the shaking of the Skoda Mingrui engine? The reasons for the shaking of the Skoda Mingrui engine are as follows: the engine is seriously carbonized. The most common reason for the car's shaking is that the throttle valve is too dirty or the fuel injector has too much carbonized.

6. The most common reason for the serious carbonization of the engine and the shaking of the car is that the throttle is too dirty or the fuel injector has too much carbon. When there is too much carbon inside the engine, the gasoline sprayed by the cold start fuel injection head will be absorbed by a large amount of carbon accumulation, resulting in the cold start mixture being too thin, making it difficult to start.